HY-BTM875 is stereo audio module, it supports analog output by default, I2S and SPDIF output are available. could work with high quality speaker, headset and other audio product.
Bluetooth module model |
HY-BTM875 |
Bluetooth version |
Bluetooth V5.0 |
Chipset |
CSR8675 BGA |
Service voltage |
2.8~4.2V |
Bluetooth protocol |
A2DP v1.3.1, AVRCP v1.6, HFP v1.7, HSP v1.2, MAP v1.1, PBAP v1.1.1, DID v1.1 |
Interface |
PIO, SPI, AIO, UART, USB, PCM, I2S, SPDIF, SPK(L/R) |
Temperature range |
-40ºCto+80ºC |
Support system |
Android, IOS and windows |
Audio decoding output |
|
Module size |
13mm x18mm x 2.5mm |
1.Default Firmware |
|
supports SBC, AAC, aptX, aptX LL, aptx HD decoding, support Analog and I2S audio. |
|
2. Key Description: |
|
MFB |
power on at high level, power off at low level, and automatically enter into pairing mode |
Pio0 |
Short press play pause, long press for 3 seconds to enter pairing, and long press for 5 seconds to clear pairing record |
Pio1 |
short press to decrease the volume |
Pio2 |
short press the volume to increase |
Pio3 |
press the previous song |
Pio4 |
short press a song |
Pio6 |
power amplifier control enable pin (with audio output, output high level 1.8V) |
3. LED Introduction |
|
BT Disconnected |
LED0 LED1 alternate flash |
BT Connected |
LED1 is always on |
Applications:
Stereo Headsets
Wired Stereo headsets and headphones
Portable Bluetooth Stereo speakers
Leave your question, we will respond to you in time